Facilities and accessories of the greenhouses

Facilities:
Greenhouses' cooling system
Greenhouses' heating system
Watering and feeding system
Energy storage curtain
Greenhouse soils
Climate control system
CO2 injection systems
Accessories
Greenhouse coverage
Profile and pipe
Connection and fastener
planting, growing, and harvesting system

Greenhouse cooling and heating system
Choosing a suitable greenhouse cooling and heating system to regulate and maintain temperature, humidity and air conditioning is vital and permanent in most greenhouses. In this text, we examine the types of greenhouse cooling and heating systems such as greenhouse heater unit, greenhouse air conditioner, Econopac, Zent and air washer in terms of fuel consumption, benefits and features so that it can be a good guide for choosing the right greenhouse cooling system. Or be a greenhouse heating system. Greenhouses must provide a controlled environment with adequate light, temperature and humidity suitable for crop growth. Their temperature depends on the type of growing crop. Often, products require a temperature of 21 to 27 degrees Celsius during the day. In some cases, the relative humidity of the air must also be controlled. Some plants also need low temperatures (for example, 10 degrees Celsius) to grow.

Heating greenhouse system

-Boiler and floor heating
-Greenhouse heater
-Heater jet

Heating greenhouse system

Heater jet
Heater jets are a type of rocket-shaped stoves that are made in the form of with chimney and without a chimney. These heater can work with gas and diesel fuel or both to generate heat. Heater jets are facilitated with a firepot, torch, and fan. The fan is installed at the input of the device and sucks the cold weather into the heater jet. The consumed fuel is burnt by the fueling set. The torch is ignited in the oven and generates an enormous amount of heat.
Advantages
•The consumed fuel cost is lower in these heat systems.
•The heater jets keep the hall warm because of the direct heat transformation.
•They can install the thermostat to set the temperature automatically.
•Repair and maintenance of the heater jets are easy and no extra cost is needed.

---